8
Never expose eyes or skin to UVC light from any source. Looking directly at the UVC
light may cause permanent eye damage or blindness. Never operate the CX-Aire Air Purifying System
out of the plenum. Avoid touching the glass portion of the lamp with your hands.
WARNING
INSTALLATION
STEP 3. OPTIONAL UVC LIGHT SHIELD
Designed to guard or shield certain plastics, wiring or air filters that
may be affected by UVC light.
A. The light shield may be mounted at virtually any angle. However, when deciding on a suitable
location, the mounting screw head cannot be in the shaded area of template (Figure 14).
B. Press shield onto duct wall. Then secure with (2) sheet metal mounting screws (Figure 15).
STEP 4. MOUNTING BASE
A. Attach the CX-Aire mounting base onto the plenum with (4) sheet metal mounting screws.
(Refer to template in Figure 3.) This must be tight in order to activate the built in safety switch.
NOTE:
DO NOT remove template from duct.
Duct wall
Duct wall
Opening for unit
Press UVC light shield onto duct wall and
secure with (2) sheet metal mounting screws
Insert UVC light shield
through lamp mounting hole
Head of mounting screw cannot be located in shaded area.
Figure 14
Figure 15
UVC Light Shield
