CF MOTO CF500-5B 2009, Service Manual, Page: 130 / 272

6 - 31
6Eng i n e R e mo v a l , I n s p ec ti on a nd I n s t a l l a ti on
6
Primary Sliding Sheave and Fixed Sheave
#
Check the drive face for any abnormal conditions
such as damage or stepped wearing.Replace if
necessary.
# Install oil seal with special tool.
Tool: Bearing install set
Assembly
Reverse the removal procedure of primary sliding
and fixed sheave for installation.
Pay attention to the following:
# Apply grease to inner bore and oil seal lip.
#
Position 8 rollers
"
on the primary sliding sheave
%
#
Install 4 dampers
$
to cam
&%
#
Install cam to primary sliding sheave.
%
Material: Lubricant grease
Note:
When inserting the spacer, press down the cam
so that the rollers will not come out of position .
No t e :
Wipe off any excessive grease
thoroughly;
Take care not to attach any lubricant
grease to contact surface of drive belt.