3672 Series Vector Network Analyzer
Contents
Fig. 2.11 3672 Input Key Area
a)
【
OK
】
key
It is used to confirm the setting and input values in the dialog and close the dialog, which is
equivalent to [OK] key in the dialog.
b)
【
Cancel
】
key
It is used to neglect the setting and input in the dialog and close the dialog, which is equivalent to
[Cancel
] key
in the dialog.
c)
【
Soft Key
】
key
It is used to recall Windows 7 system soft keyboard.
d)
【
BkSp
】
key
Press down this key and the marker after entering a value to delete the original input.
e) Number keys
It includes 0-9, which is used to enter the value when setting the measurement, and then the
corresponding unit key can be pressed down to complete the input.
f)
Unit keys
It is used to end the value input and assign a unit to the input value. The corresponding units of each
key are as follows:
【
G/n
】
G/n (10
9
/10
-9
)
【
M/μ
】
M/μ (10
6
/10
-6
)
【
k/m
】
k/m (10
3
/10
-3
)
【
】
Basic units: dB, dBm, °, s, Hz, or dB/GHz, which can also be used for unitless value input and
used as the Enter key.
2) ADJUST area
It includes navigation keys and adjusting knob, as shown in the following figure.
