3672 Series Vector Network Analyzer
Contents
sweep time is set to 0, the analyzer will automatically select the shortest sweep time. When the sweep
time is longer than or equal to 300 ms, the analyzer will display a sweep indicator to indicate the
point-to-point measurement sweep. The measurement indicator is a small upward arrow, which points to
the point which has just been measured on the trace.
1) Set sweep time
Select the menu path:
[Stimulus]→[Sweep]→[Sweep Time...]
, and the
Sweep Time
dialog will be
displayed.
Input the sweep time in the
[Sweep Time]
box directly. If setting through the keys and the auxiliary
menu bar, enter the sweep time directly in the input toolbar.
Fig. 3.9 Set Sweep Time
3.6 Data Format and Scale Setup
3.6.1
Data format
Select the menu path:
[Response]→[Format]
, and the
Format
sub-menu will pop up.
Fig. 3.10 Set Data Format
3.6.2
Scale
The scale is used to set and display scale of the vertical part of the grid. Under the polar coordinate
and Smith chart format, it will be used to change the full scale value of the circumcircle. The scale and
format setting determines the display mode of measurement data on the screen. Under the logarithmic
format, the scale setting range is 0.001 dB/grid ~ 500 dB/grid.
Select the menu path:
[Response]→[Scale]
, and the
Scale
sub-menu will pop up.
Click the corresponding input area or button to set the proper scale, reference position and
reference level.
