3
Typical Applications
3.3 Frequency Range Setup
Group delay
SXY
3) Create the S parameter measurement trace
Select the menu path:
[Trace]→[Create Trace]
, and click
S-parameter
in the dialog
Fig. 3.3 Definition of S Parameter
3.2.2
Change measurement types of the trace
If a trace shall be set and modified in the analyzer, the trace shall be made as the currently activated
trace.
1) Change activation status of the trace
Click the
Trace Status
button in the window, and the corresponding trace will become the currently
activated trace.
Fig. 3.4 Change Activation Status of the Trace
2) Change measurement parameters of the currently activated trace
Select the menu path:
[Response]→[Meas]
, and the
Meas
sub-menu will be displayed, as shown
in Fig. 3.5.
Fig. 3.5 Set Measurement Types of the S Parameters of the Currently Activated Trace
3.3 Frequency Range Setup
Frequency range:10 MHz ~ 13.5 GHz/26.5 GHz/40 GHz/50 GHz/67 GHz.
Frequency resolution: 1 Hz.
1) There are tow modes for frequency range setting
a) Specify start frequency and stop frequency.
b) Specify center frequency and frequency span.
