Ceyear 1465 Series, Programming Manual

Page: 42 / 143

3 SCPI
3.3 Instrument subsystem command
35

ROSCillator ....................................................................................................... 109

SYSTem ............................................................................................................ 109
3.3.1 OUTPut subsystem
OUTPut subsystem commands are used for controlling the switch of RF output signal.
The following commands are used for setting operation modes:

OUTPut:BLANking[:STATe] ···················································································· 35

OUTPut[:STATe] ····································································································· 35

OUTPut:MODulation[:STATe] ················································································· 35
:OUTPut:BLANking[:STATe] <State>
Function: This command sets the state of RF Blank. When RF Blank is turned on, if the signal
generator is in spot frequency state, RF output signal will be turned off during
frequency switching; if the signal generator is in sweep state, RF output signal will be
turned off during frequency band switching and RTC.
Setting format:
OUTPut:BLANking[:STATe] ON|OFF|1|0
Query format:
OUTPut:BLANking[:STATe]?
Parameter:
<
State >
Boolean data is as follows:
ON | 1: Blank is turned on
OFF | 0: Blank is turned off.
Example:
OUTPut:BLANking 1
The Preceding example sets the signal generator Blank to ON state.
Reset status:
0
:OUTPut[:STATe] <State>
Function:
This command enables RF output of the signal generator.
Setting format:
:OUTPut[:STATe] ON|OFF|1|0
Query format:
:OUTPut[:STATe]?
Parameter:
<
State >
Boolean data is as follows:
ON | 1: RF output
OFF | 0: RF OFF
Example:
OUTPut: 1
The Preceding example sets RF output of the signal generator..
Reset status:
0
Key Entry
【
RF ON/OFF
】
:OUTPut:MODulation[:STATe] <State>
Function: This command is used for setting the state of the modulation main switch.
Setting format: :OUTPut:MODulation[:STATe] ON|OFF|1|0
Query format: :OUTPut:MODulation[:STATe]?