Ceyear 1465 Series, Programming Manual

Page: 35 / 143

2 Remote Control
2.2 Remote interface and its configuration
28
Figure 2.7 LAN Interface Settings
Ensure that the signal generator is physically connected properly by 10Base-T LAN or 100Base-T
LAN cable
As the signal generator only supports the construction of a single LAN control system and the setting of
static IP address, rather than DHCP and the access to the host via DNS and domain name server, users
do not need to modify the subnet mask. In the instrument, it is fixedly set to: 255.255.255.0
。
2.2.2 GPIB

Connection Establishment .................................................................................. 28

Interface Configuration ........................................................................................ 29
2.2.2.1 Connection
Connect the 1465 series signal generator to the external controller (computer) with GPIB cable, as
shown in Fig. 2.8:
GPIB
GPIB address
Fig. 2.8 GPIB Interface Connection
CAUTION