CET s.r.l. Parallel Message Display
page 12
INPUT
FUNCTION
D0
Return to WAITING MESSAGE visualisation
D1
Move to following MESSAGE (1 step) with temporary visualisation of message NUMBER
D2
Return to previous MESSAGE (1 step) with temporary visualisation of message NUMBER
D3
Not implemented
D4
Message number increase by 50 steps
D5
Message number decrease by 50 steps
D6
Causes software date and version to be displayed
2.5.2. Command TYPE 10: Message Print
Using this message, you can print the message being displayed through the serial line.
Inputs
SY
D
C
B
A
Command TYPE 10
IMP
1
0
0
1
Coding and number are always read at the 0 1 variation of the synchronism signal SY.
2.5.3. Command TYPE 12: Display flashing mode
Using this command, you can cause the message shown on the display to flash.
This is a Set/Reset type command, i.e. the first time the input is activated, the flashing mode is also activated;
the following command deactivates it.
Inputs
SY
D
C
B
A
Command TYPE 12
IMP
1
1
0
0
Coding and number are always read at the 0 1 variation of the synchronism SY signal.
.
2.5.4. Command TYPE 14: System language selection / Message bank
selection.
Inputs
SY
D
C
B
A
Command TYPE 14
IMP
1
1
0
1
