CET s.r.l. Parallel Message Display
page 13
Using this coding, you can set the system language and message bank you are to work with.
Upon power-up and with the A, B, C and D commands set, the display unit automatically reads the system
language and message bank.
D8
D7
D6
D5
D4
D3
D2
D1
D0
Service language Message bank
The first 4 bits (D0 to D3) select the message bank you are to work with. The bank number is created during
programming using the WINTEXT software package.
Desks can be selected as follows:
D0: BANK 1
D1: BANK 2
D2: BANK 3
D3: BANK 4
The next 5 bits (D4 to D8) select the system message language you are to work with, in the following order:
D4: ITA - ITALIAN
D5: GB - ENGLISH
D6: DE - GERMAN
D7: SPA - SPANISH
D8: FRA - FRENCH
Upon power-up, if no bits are set, the instrument reads Bank 0 and Italian as system language.
To change the system language or message bank during operation, activate the synchronism command SY with
the coding desired.
