ETHOS Model Transmitter
2020 Cervis, Inc.
5
1.4 System Startup
1. Press and Release the
STOP
button. (If the STOP is down you only have to
release it).
2. Wait for Radio TX/RX LED to begin flashing (indicates communication with
associated receiver)
3. Press and hold WARNING/START switch until horn sounds or main contactor
closes.
Note: If the Radio TX/RX LED is on solid once you release the STOP switch the handheld
may not be associated to a receiver or the receiver it is associated to may not have power.
4. Once a link is established and the main contactor of the crane is closed you may
commence operation.
At anytime during operation you may press the STOP switch down to STOP
all motion commands. If unsure of anything during operation press STOP
and remove battery and consult factory for support.
