ETHOS Transmitter
©2020 Cervis, Inc.
1
1.0 ETHOS Transmitter
The Warrior ETHOS model transmitter is an industrial transmitter that is designed to provide 3
motion 2 speed crane control with A/B select feature standard. It is specifically offered to work
with the Warrior MU-9x15 model receiver. The ETHOS model has eight dual redundant two step
actuators for motion control.
The transmitter’s vented enclosure is made of an impact resistant plastic, designed to meet an
ingress protection rating of “IP65” according to International Electrotechnical Commission (IEC)
standard 60529. The unit has four diagnostic LEDs that indicate radio frequency (RF)
transmit/receive, Battery status and A selection, and B selection.
Frequency Channel Hopping Direct Sequence Spread Spectrum (CH DSSS) wireless
technology (at 900MHz @ 100mW) allows HHMS-9XW08 transmitters to create a robust link
with Warrior receivers in congested radio environments. These transmitters feature seamless
association to receivers without having to open a machine-mounted receiver.
Figure 1.Switch Assignments
Note: Refer to receiver manual for relay sequence relationships and DIP switch configuration
options.
Trolley Reverse
Trolley Forward
Hoist Up
Hoist Down
A/B Select/AUX
WARNING/START
(B1)
Custom
(B2)
Start
Bridge Reverse
Bridge Reverse
Stop Button
