SmaRT BU-x18XF and BU-xH18XF
U069.3.3
iv
Note to the Manual User
Note: The standard SmaRT base unit is available to operate at 900MHz or 2.4GHz using Direct
Sequence Spread Spectrum (DSSS) wireless technology. To avoid repetition and possible
confusion, the base unit may be referred to as the
“BU-x18XF” or “BU-xH18XF” throughout this
document, where
“x” represents either 900MHz as “9”—for BU-918XF or BU-9H18XF—or 2.4GHz
as
“2”—for BU-218XF or BU-2H18XF.
Related Documents
System-related Cervis, Inc. Engineered System Approval document
Appropriate SmaRT remote control unit user manual
Contact us with questions during installation or troubleshooting at (724) 741-9000.
Cautions and Notes
Cautions warn the user that certain circumstances or conditions warrant that the user be aware
of a presence of danger that may result in harm
—or even death—to personnel or destruction of
equipment. Please see the following example:
Caution!
Prevent inadvertent movement of the machine while establishing
the communication link between SmaRT base units and remote
controls. Always disconnect power from the base unit before
attempting to enter Associate mode.
Notes
—such as the following example—provide information that may be useful to the user or
are pertinent to system operation.
Note: Cervis-provided harness wires are either color-coded or individually numbered to aid in
properly wiring the controlled devices to the P1 and P2 base unit connectors.
