Base Unit Manual
2019 Cervis, Inc.
7
4.0
SmaRT BU-x18XF in SmaRT Remote Control Systems
The basic standard SmaRT Remote Control System consists of at least one SmaRT base unit, a
SmaRT remote control unit, and the wiring harness used to connect the base unit to the
controlled apparatus. A single base unit can communicate with multiple SmaRT remote control
units
—up to eight—a variety of which are available, including the PTO-xH06, the PG-xH14
pistol-grip, the OO-218, the MCB-xH4JS handheld remotes, and the SmaRT Console Remote
examples shown in Figure 4.
Communications between the base unit and the remote control units are established at the
factory using the Associate process, which can also be easily performed on site when necessary
using the SmaRT remote control unit. Associate processes for each remote control unit are
described in detail in each SmaRT remote manual and Cervis, Inc. Engineering SpecSheet.
Figure 4. SmaRT BU-x18XF/BU-xH18XF with SmaRT Remote Control Unit Examples
HH-xH06
Handheld Remote
PG-xH14-DIS
Pistol Grip Remote
BU-x18XF/BU-xH18XF Base unit
HH-218-DIS Remote
PG-xH12JS
Pistol Grip Remote
CB-xH4LV
Remote
HH-xH10
Handheld Remote
MCB-xH4JS
Remote
PG-xH14
Pistol Grip Remote
