The build process continued -
Steps 61 to 72 are for Fastlane installation only. If you are not installing a Fastlane, please proceed to step 73
STEP 59
Fit the return water jet direction face plate.
STEP 60
Using the skimmer face plate mark the positions of the screw holes, screw
on using even pressure and then cut around the inside of the plate to expose
the entrance to the skimmer. Clip on cover plate to hide the screws and
continue filling the pool until half way up the skimmer throat.
STEP 61
See parts above required for fitting the Fastlane.
IMPORTANT - Please make sure you are using the Certikin
supplied Fastlane fittings and the additional pieces shown from
the Fastlane fixing kit.
STEP 62
Fittings for Fastlane hose.
STEP 63
Silicone white fitting in to the Fastlane fitting.
STEP 64
Fit and silicon the white threaded reducing bush into the rear
of the previously fitted Fastlane fitting.
Important:
Please ensure you use the Certikin provided Fastlane fittings
