FibeAir® IP-10C
Installation Guide
Ceragon Proprietary and Confidential
Page 36 of 63
3.2
1+0 Remote Mount Installation
The following components are necessary for a 1+0 Remote Mount installation:
Item Description
Quantity Remarks
1
IP-10C RADIO
1
2
RFU-C REMOTE MOUNT KIT
1
For Remote Mount
3
REMOTE MOUNT ADAPTOR
1
For Remote Mount 6-13 GHz
For 6-13 GHz:
1 Mount the remote adaptor and O-Ring to the pole mount using the four M5
flat screws supplied in the Remote Mount Adaptor kit, and tighten the
screws.
2 Mount the adapting bar using two M8 flat screws.
3 Mount the IP-10C on the antenna using the four M8 captive screws and
washers supplied, assembled, in the IP-10C, and thread the screws without
fastening. After all four screws are threaded to the required location,
tighten the screws starting from the bottom screws.
4 Place the O-Ring into the flange groove on both ends of the flexible
waveguide.
5 Connect the flexible waveguide to the remote mount adaptor and tighten
the screws and washers.
6 Mount the flexible waveguide on the antenna, and tighten the screws and
washers.
7 Connect the cables as described in
Cable Connections and Grounding
on page 20.
