FibeAir® IP-10C
Installation Guide
Ceragon Proprietary and Confidential
Page 32 of 63
2.11
Securing the Cables
All cables should be secured on site using a T-Rups kit, P/N Outdoor Ties (SI-
0027-0), every meter. When using this kit, take special care to apply the
proper amount of force in order to avoid damaging the cable being secured.
This is especially important for optical (SFP) cables.
The following clamps are available for optical (fiber) cables:
Part Number Marketing Model
Item Description
SI-0954-0
Fiber_clamp_2cbl_6.5-
7.5mm
DUAL FEADER CLAMP FOR 6.5-7.5mm CABLE 2
WAY.
The following clamps are available for bundled Cat5 cables:
Part Number Marketing Model
Item Description
SI-0766-0
RG8 8 feeder clamp
DUAL FEADER CLAMP FOR RG-8/U CABLE 8 WAY.
SI-0765-0
RG8 6 feeder clamp
DUAL FEADER CLAMP FOR RG-8/U CABLE 6 WAY.
SI-0764-0
RG8 4 feeder clamp
DUAL FEADER CLAMP FOR RG-8/U CABLE 4 WAY.
SI-0763-0
RG8 2 feeder clamp
DUAL FEADER CLAMP FOR RG-8/U CABLE 2 WAY.
2.12
Grounding the Cables to the Antenna Tower Every 50m
Cables must be grounded as follows:
For optical (SFP) cable (see
on page
27), no
grounding is required.
For combined cables (see
Connecting Bundled Cat5 Cable and Power Cable
on page 29), the cable should be grounded to the antenna tower every
50m, using an SI-0391-0 grounding kit, IF RG-8 GRD KIT.
