FibeAir® IP-10C
Installation Guide
Ceragon Proprietary and Confidential
Page 45 of 63
2 Mount the twist to the Circulator/Symmetrical Coupler using the O-Ring
and four screws supplied in the Twist Kit. Tighten the screws.
Note:
For 15 and 18 GHz frequencies, two O-Rings are supplied in
the Twist Kit and should be mounted in the twist grooves.
For the 6 GHz frequency, a gasket is used instead of an O-
Ring. The gasket should be mounted between the twist and
the RFU-C Circulator/Symmetrical Coupler Kit.
Important!
Make sure the polarization mounting direction of the twist
to the RFU-C circulator / symmetrical coupler is according
to the antenna polarization.
