background image

36

37

5. Product specifications

6. Product warranty

Automatic Thermal Massager

100-240V~, 50/60Hz

150VA

CGM MCB-1201

CERAGEM CO., LTD

 Recommended 

Height for Body 

Sensing

120cm~186cm

When spread out : 2080mm x 600mm x 120mm(±5mm)
When folded : 1170mm x 600mm x 175mm(±5mm)

You are only eligible to receive service free of charge for a breakdown within 1 year of purchasing the product and with appropriate 
use of the product. Products used for commercial purposes or used frequently may have shortened warranty periods.

In order to provide quick and satisfactory service, we require that customers check the points stated below before requesting 
service. Services for items stated below will be charged.
- If the product is connected to a socket that is not 100-240V~.
- If the power has not been correctly connected.
- If the consumer did not install the product or use the product properly.
- If depletable component parts (inner cloth, outer cloth, external project cover and etc.) have worn out
- If an error in use has led to a breakdown.
- If breakdowns occur due to natural disasters (floods, burns, earthquakes, falling of a thunderbolt, war and etc.)
- if breakdowns occur when used in an inappropriate environment.

If the product breaks down or is damaged as follows, the responsibility is with the customer.
- If the product is repaired by an unofficial technician and causes a breakdown.
- If the product has been randomly repaired or remodeled by the consumer and causes a breakdown.
- If the product is damaged or breaks down due to misuse, abuse or carelessness.

This letter of warranty becomes applicable at the time of purchase or contract.
This letter of warranty is valid only to the person who purchased the product, and therefore those who acquired this product 
by transfer from the initial purchaser will not receive any warranty.
Any other letters of warranty that have not been issued by Ceragem, letters that have been additionally issued by others, or 
letters that have passed the expiry date are exempt from the terms stated above. 

* Ceragem provides warranty on their products, under the Consumer Protection Law.
* If you purchase a product that has Ceragem’s approval, warranty will last for 1 year and component repairs and
  services will be provided for free.
* This warranty is only valid in the country that the product has been purchased in.
* Contact the customer center in case of a breakdown.
* This product’s component parts will be kept for a term of 3 years. Important component parts MOTOR, PCB, 
  projector sliding part (internal projector) and etc. will be kept for a term of 5 years.

place of purchase

date of purchase 

Warranty period

Model 

Product 

Telephone number

Postal code

Location

Address 2

Address 1 

Customer’s name 

(The place of purchase for this product must be completed and verified in order to receive services free of charge in the future.)

Service free of charge

Charged service

Matters that require attention

Terms of warranty

Warranty

1 year from the date of purchase 

Serial No. 

                  177-14, Osaekdang-ri, Seonggeo-eup,

Seobuk-gu, Cheonan-si, Chungcheongnam-do, 

331-831, KOREA
Tel : 82-41-523-2550     Fax :82-41-523-2560 

* To improve quality, design and product specifications may be changed without notice.

26kg(±2㎏)

Environment

temperature

10℃~40℃

Purpose of use

Maximum 

Permissible Weight

135kg

Help to muscle relaxation therapy, temporary relief of minor
muscle and joint pain, stiffness, blood circulation. 

Model

Article

Voltage

Consumption

Power

Manufacturer

Measurement

Weight

(excluding components)

Summary of Contents for CGM MCB-1201



















































Reviews: