CeraGem CGM MCB-1201, User Manual

Page: 20 / 50

1 2
18
2. How to use the remote control 1. Remote control layout
19
Turning on the Remote Control
1. Check the condition of the product connections and press
the power key of the remote control.
- Press the remote control for 2~3 seconds to turn it off.
- Start the remote control after opening the auxiliary part.
2. Check the display on the remote control.
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
3. Select the mode to be used.
- Refer to pages 21~26 for the mode selection.
- Refer to page 20 for details on how to adjust the temperature.
Semi-automatic
mode button
Internal/External projectors
button for selection
Power button
Semi-automatic
mode symbol
Manual mode symbol
Internal projector
position symbol
Automatic mode
button (Mode A)
Internal projector’s
temperature symbol
External projector’s
temperature symbol
Mode Symbol
Mode 1 button
Mode 2 button
Mode button
(Mode 3~9)
Up/Down button
Manual mode button
1
2
1 2