CeraGem CGM MCB-1201, User Manual

Page: 35 / 50

E2
34 35
3. Check before A/S request 4. Remote control error messages
In case of error during operation, the following messages appear on the remote
control display:
After checking the error messages, contact the Customer Support Center.
Symbol Meaning
E1
When the internal projector’s temperature is over 75℃, the “E1” error
appears on the temperature display of the internal projector, and all
operations of the product stop.
When the external projector’s temperature is over 70℃, the “E2” error
appears on the temperature display of the external projector, and all
operations of the product stop.
If the motor is overloaded, and certain abnormal current is detected,
the “E” error appears on the automatic mode display, and all
operations of the product stop.
If normal communication between the remote control and the main
body is impossible, the “C” error appears on the automatic mode
display, and all operations of the product stop.
It appears when the limit switch is faulty and all operations of the
product stop.
C
LE
E
Caution
Is the product malfunctioning?
Q : Can you move the internal projectors using the Up/Down key?
A : The internal projectors can be moved using the Up/Down key only in semi-automatic
mode and manual mode.
Are error messages displayed on the remote control?
Q : Does the remote control screen display E1, E2, E, C, or LE?
A : After checking the error messages, contact the Customer Support Center.
Never dismantle the product arbitrarily.
Does the remote control not turn on?
Q: Is the power switch at the bottom of the product turned on?
A: Turn on the power switch.
Q: Is the power cord properly connected?
A: Reconnect the power cord.
Q: Is the remote control properly connected?
A: Reconnect the remote control.
Q : Is the auxiliary part spread out completely?
A : Start the remote control after spreading out the auxiliary part.
Do the external projectors not work?
Q: Are the external projectors properly connected?
A: Reconnect the external projectors.
A : If you lift the auxiliary part while using the product, the remote control power turns off.
The internal projector moves to your head automatically.
Please use after turning power on again.
Q : Does the internal projector move to your head while using the product?