CeraGem CGM MCB-1201, User Manual

Page: 22 / 50

2. How to use the remote control
20
Adjusting the Temperature
The temperature of the internal projector and external projector can be adjusted when the mode is
in use.
Automatic Mode (Mode A)
3. How to use the product (by mode)
21
(Mode Duration : Approx. 36 minutes 30 seconds)
1. Turn on the remote control power and check the display.
- The mode display will show “A”
- To change the mode, press the desired mode button
once more in 5-second standby state after pressing the
mode button.
2. Select the mode by pressing the automatic mode button
(Mode A).
3. The mode begins automatically, and body sensing
starts.
Lie in the correct posture.
- When you move the internal projector, the moving projector display appears.
1. Check the current temperature.
2. Press the temperature key and set the temperature to
the desired level using the Up/Down button.
- The temperature can be adjusted by 1℃.
- If you do not press the button for 5 seconds in temperature standby state, the
temperature is converted into the current level when the temperature setting is
completed.
3. Check the changed temperature set point on the remote control
display.
- If you do not press the setting button after setting the temperature by pressing the
internal/external projectors’ temperature, the temperature is converted into the current
level after the temperature display blinks for about 5 seconds.
- If you press the Internal/External projectors button for selection, the setting
temperature display for the projector will flash, and a buzzer sound will be emitted.
(The temperature is in standby state.)
Pressing once (Internal projector temperature selected)
Pressing repeatedly (External projector temperature selected)
Internal projector
30℃~60℃ 30℃~65℃
External projector
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
1 2 1 2
1
2
- During body recognition, internal projector position symbols will flash in order.