page 40
www.CentSys.com
S
ECTION
1
0
10.8. Step 8
Manually release the operator using
the key provided with the kit, and
swing the gate to the desired open
position.
FIGURE 35
G-clamp or
spot weld
Gate in
open
position
10.9. Step 9
If the gate opening angle is sufficient and the operator is utilising the majority of its
stroke, then secure the Gate Bracket using the most appropriate means.
Remove the operator before welding, if welding is required.
If this is not the case or the operator does not have enough stroke for the gate to open
fully, re-check the A- and B-Values from Table 16 on page 36 to Table 17 on Page 37.
Gate Bracket
Welding machine
Bolt
Nuts
Gate
Gate Bracket
OR
OPERA
TOR
INS
TALLATION
-
OUTW
ARD
OPENING
GATES
FIGURE 36
