page 36
www.CentSys.com
Ensure that the gate mass does not exceed the specifications on
page 13.
10.1. Step 1
Depending on the gate opening angle determined in Section 6.2 refer to Figures 27 to 28
for the correct installation geometry.
In most cases it will be necessary to make up a suitable extension bracket on which to
mount the operator’s Wall Bracket.
10. Operator Installation - Outward Opening
Gates
S
ECTION
1
0
OPERATOR
INS
TALLATION
-
OUTW
ARD
OPENING
GATES
FIGURE 27. VANTAGE 400 OUTWARD OPENING GATE
Make up bracket to suit
A
B
Gate in closed
position
Gate in open position
VANTAGE
operator
Gate opening angle
VANTAGE 400 Outward Opening Gate:
VANTAGE 400 Outward Opening Geometry Tables:
Gate Opening Angle
A
B
90°
220mm
170mm
100°
200mm
160mm
110°
185mm
160mm
TABLE 16