18
Control Panel
(at the
left side
of the machine)
You will find the control panel at the left side of the machine. This panel includes the clean
button, the mode button and four LED indicators.
Operation of the control panel:
1.
When the unit is plugged in and the power switch is turned on, the power indicator and
the other three indicator lights are all on.
2.
After three minutes for water inlet, the ice maker will start to make ice automatically.
Only the power and ice-making indicators will be on.
3.
During harvest, the harvest indicator light is on and ice-making indicator off. When the
ice storage bin is full, only the ice-full indicator and power indicator are on.
NOTE: During the ice making cycle or harvest mode, the machine cannot enter the
clean mode. Pressing the clean button during the ice-making or harvest mode,
it will be ignored. The ice-making or harvest will continue.
4.
When you want to clean the machine, turn off the power switch first, then turn it on again.
Press the Clean button within 3 minutes and the ice maker will start the cleaning mode,
with harvest and ice-making indicators blinking. After 30 minutes, the cleaning mode
stops and the harvest indicator and ice-making indicators are on steady. If you want to
restart the ice-making process after cleaning, turn OFF the power switch first, then turn on
the power switch again and the machine will automatically go into the ice-making
process.
5.
If you want to interrupt the cleaning mode before it is finished, do not press the Clean
button again. Instead, turn the power switch off. This stops the cleaning cycle.
6.
If the unit is connected to the power supply but no visual indicator lights up when the
power switch is turned on, the fuse in the control panel box may need to be replaced.
Descriptions of LEDs and buttons:
1.
Bin Full (white) LED:
Bin Full indicator light
When this LED is on, it indicates that the ice level in the bin is high enough to hold the
water curtain open, the microswitch is open, or there is something obstructing the closing
of the water curtain. The unit will stop working. When ice cubes are removed from the ice
storage bin, clearing the ice-full probe, the white LED will flash for 3 minutes. Then the
unit will restart and return to the ice-making mode.
