19
2.
Ice Making (Green) LED:
Ice Making indicator light
When this LED is on, the unit is in the ice-making mode.
3.
Ice Harvest (Yellow) LED:
Ice Harvest indicator light
When this LED is on, the unit is working in the ice harvest mode.
.
4.
Power (White) LED:
Power indicator light
When the main power switch that is located on the left side of the unit is turned on, The
power indicator LED is on ,the unit starts working after 3 minutes..
5.
Mode button:
: This button is mainly for service. When it is pressed, the ice making
mode changes to ice harvest mode or vice versa. The mode is indicated by the status of
the green or yellow LEDs.
6.
Clean button:
If you press the Clean button within three minutes after the power has been turned on, the
ice maker will enter the cleaning mode. If press the Clean button and hold it
for more than
six seconds, the machine will enter the draining mode. The green and yellow LEDs will
be blinking together.
Ice Size Adjustment Guide:
1.
Press and hold the “
Clean
” button and the “
Mode
” button together for at least 3 seconds.
The unit will enter the Ice Size Adjustment mode. The “
ICE
” LED (green) will be
blinking continuously during the ice size adjustment.
2.
While in the Ice Size Adjustment mode, press the “
Clean
” button or the “
Mode
” button
for the desired ice size.
Smaller ice setting:
By pressing the “Clean” button, you can decrease the size of the ice cubes. The “FULL”
LED (red) will flash as you lower the ice size and will finally be blinking at the setting of
smallest ice size.
Larger ice setting:
By pressing the “Mode” button, you can increase the size of the ice cubes. The “HARVEST”
LED (yellow) will flash as the larger size is set and will blink when the setting of largest ice
size has been reached.
After 10 seconds without any operation, the unit will automatically memorize the current
state and return to the previous mode.
NOTE
:
•
If during the ice size adjustment mode the “BIN FULL”, “ICE MAKING” and
“HARVEST” LEDS blink all at once, this indicates that the unit is in the regular (middle)
setting of the ice size.
•
When the machine is in the cleaning stage or ice full stage, the ice size adjustment mode
cannot be accessed.
IMPORTANT:
•
Avoid letting water contact the control box