SKU 32206/32208
For technical questions, please call 1-800-444-3353.
PAGE 19
phASe 8: Saw Blade installation
tO preVeNt iNjUrY
FrOm ShArp BlADe:
Wear heavy duty work gloves
and ANSi-approved safety
goggles during assembly,
especially when handling blade.
FigUre FOr Step 8-1
15B
1. Remove the four Knobs (15B) from the
Upper and Lower Pulley Guards (14B,
21B). Remove and set aside the Pulley
Guards.
FigUre FOr Step 8-2
tABle piN (38B)
tABle iNSert (37B)
2. Remove the Table Insert (37B) and Table
Pin (38B).
5B
FigUre FOr Step 8-3
3. Turn the Blade Tension Knob (5B) coun-
terclockwise about 5-10 full turns.
FigUre FOr Step 8-4
iNSert SAW
BlADe here,
BACK FirSt
teeth pOiNt
DOWNWArD
AS BelOW
4. With both hands, hold the Saw Blade
with its
teeth pointing downward
and
away from your body. Then, insert the
Saw Blade (20B) back side first through
the slot in the Table (36B).
reV 02d
