SKU 32206/32208
For technical questions, please call 1-800-444-3353.
PAGE 11
phASe 2: Foot Assembly
h
K
O
q
required hardware
letter
Description
q’ty
(for this phase)
H
M8 Washer
4
K
M8 Nut
4
O
Foot Assembly
4
Q
Foot Bracket
4
FigUre FOr Step 2-1
3A
q
theSe hOleS
mUSt liNe Up.
1. Press a Foot Bracket (Q) over each
corner of the Front and Rear Panels (3A,
2A). One of the holes in the Bracket
should line up with the hole in the corner
of the Panel as shown.
FigUre FOr Step 2-2
3A
q
O
2. Insert a Foot Assembly (O) through each
Foot Bracket (Q) and Panel (3A, 2A).
Secure with Washer (H) and Nut (K).
phASe 3: Bandsaw Body to Stand
Assembly
h
j
K
B
required hardware
letter
Description
q’ty
(for this phase)
B
M8 x 40 Bolt
4
H
M8 Washer
8
J
M8 Lock Washer
4
K
M8 Nut
4
Belt
CUtOUt
StAND
mOUNtiNg
SlOtS
pArt 1A
FigUre FOr Step 3-1
1. Align the Saw Body with the Stand be-
fore lifting it. The Pulley(s) need to align
over the belt cutout and the four bolt
holes must line up with the stand mount-
ing slots, as shown above.
reV 04c; 04g; 05b; 05l
