SKU 32206/32208
For technical questions, please call 1-800-444-3353.
PAGE 10
reV 04c; 04g; 05l
FigUre FOr Step 1-3
2A
7A
7A
3A
3. Attach the two Horizontal Braces (7A)
inside the flanges on the Front and Rear
Panels (3A, 2A).
9A
1A
13A
8A
FigUre FOr Step 1-4
4. Attach the Motor Plate Bracket (9A)
to the front of the Mounting Plate (1A)
with the raised section of it towards the
center. The Motor Plate Bracket (9A)
should be near the Switch Cover (13A)
as shown above.
Attach the Brace (8A) under the Mount-
ing Plate (1A) toward the rear as shown.
9A
10A
FigUre FOr Step 1-5
5. Attach the Motor Plate (10A) to the Motor
Plate Bracket (9A). Connect the end that
is folded back on itself.
FigUre FOr Step 1-6
10A
7A
6. Attach the other end of the Motor Plate
(10A) to the Horizontal Brace (7A).
Make sure the stand rests square on the
7.
floor and that the Mounting Plate (1A)
is level. Then,
wrench tighten
all Nuts
from phase 1 securely.
