SKU 32206/32208
For technical questions, please call 1-800-444-3353.
PAGE 24
SettiNgS
tO preVeNt
SeriOUS iNjUrY
FrOm ACCiDeNtAl
OperAtiON:
turn the power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before making
any adjustments to the tool.
Blade guide Adjustment
1. Loosen the Knob (25B) and set the Up-
per Guide Support (27B) as close as
possible to the top surface of the mate-
rial being cut.
Then, securely tighten the Knob (25B).
2.
table Angle Adjustment
FrONt SiDe
BACK SiDe
1. Loosen the two Knobs (15B) underneath
the Table (36B).
Tilt the Table (36B) to the left or right until
2.
the Needle points to the desired angle on
the Scale (40B). Then, securely tighten
both Knobs (15B).
