Page 5
SKU 97816
For technical questions, please call 1-800-444-3353.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
disconnect the plug from the
c.
power source and/or the battery
pack from the power tool before
making any adjustments, chang-
ing accessories, or storing power
tools.
Such preventive safety mea-
sures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool.
Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for
e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If dam-
aged, have the power tool repaired
before use.
Many accidents are
caused by poorly maintained power
tools.
Keep cutting tools sharp and
f.
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
use the power tool and acces-
g.
sories in accordance with these
instructions, taking into account
the working conditions and the
work to be performed.
Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
Service
5.
Have your power tool serviced by
e.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Table Saw Safety Warnings
Ground this product.
1.
This Table Saw
requires the attachment and use of
a UL
®
listed, 220 volt, grounded,
3-prong, electrical Power Cord Plug
(not included). Only a qualified elec
-
trician should install the Power Cord
Plug. Never remove the grounding
prong or modify the Power Cord Plug
in any way. Do not use adapter plugs
with this product. To comply with the
National Electric Code, and to pro-
vide additional protection from the
risk of electrical shock, this product
should only be
connected to a 220 volt, 3-hole outlet
that is protected by a Ground Fault
Circuit Interrupter (GFCI).
Do not force the Table Saw.
2.
This
tool will do the work better and safer
at the speed and capacity for which it
was designed. Do not force the Saw
Blade into the workpiece being cut.
WArNINg!
3.
Keep hands and
fingers away from cutting area and
Saw Blade. Use a “push stick” (not
included) if necessary.
Maintain labels and nameplates on
4.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
