Step 3: Raise the SADDLE (#40) up under the transmission by stepping on the PEDAL PUMP
PISTON (#11) as shown in Figure 7.
Figure 7--Raising the Saddle
Step 4:
When the vehicle is safely raised, maneuver the Transmission Jack
underneath the vehicle. You will want to position the Transmission Jack so
that the pairs of STATIONARY PLATES (#42) will hold the forward and
rearward ends of the transmission, respectively, as shown in Figure 8.
s
Figure 8--Placing the Stationary Plates
Step 5:
If necessary, loosen the NUTS (#44) to adjust the positions of the
STATIONARY PLATES to best cradle the transmission. Tighten the NUTS
before continuing.
#33610
Page 8