Place the SADDLE A (#38) over the tip of the RAM (#25) as shown
in Figure 3.
Your Differential Jack is ready for use.
For Transmission Service
Your Transmission Jack comes with two different Saddles.
SADDLE (#40) is for use in removing and installing Transmissions.
Place the Saddle Assembly from Step 4 above onto the tip of the
RAM as shown in Figure 4.
Your Transmission Jack is ready for use.
Saddle B
(#39)
Figure 3--Placing Saddle B
Saddle A
(#38)
Figure 4--Placing Saddle A
OPERATION
Warning: Only use the Jack on a hard, flat and level surface. When not transporting
a load, block the wheels to prevent inadvertent movement.
Before use, make sure your vehicle is properly and safely suspended on an in-floor hydraulic lift.
You will not be able to use your Transmission Jack by raising the vehicle with a standard floor jack
and jack stands.
Make sure the Transmission or Differential you will be removing or intstalling does not exceed the
600 lbs. weight capacity of your Transmission Jack.
#33610
Page 5