Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
M020-00009-EN
Rev. 4
CENTA Antriebe Kirschey GmbH
11 / 52
3
Delivery, transport, storage and disposal
3.1
Delivery
After delivery, the coupling:
must be checked for completeness and correctness of the delivery.
must be examined for possible transport damage (which must be reported
immediately to the carrier).
3.2
Transport
CAUTION
Injury and material damage can occur as a result of:
Incorrect transportation of couplings
Ensure that the coupling is correctly transported.
CAUTION
Material damage to coupling components can occur as a result
of:
Contact with sharp-edged objects
Protect coupling components for transportation.
Only hoist coupling components with nylon belts or ropes.
Always cushion parts when supporting them from below.
Following transportation damage:
Check the coupling carefully for damage.
Consult the manufacturer (Address see chapter 1).
3.3
Storage
CAUTION
Material damage to elastic elements and rubber parts can occur
as a result of:
Incorrect storage
These parts must be stored laid flat and so they cannot distort, and
protected from ozone, heat, light, moisture and solvents.
IMPORTANT
Rubber parts are marked where possible with their production date. From this date,
they may only be stored for a maximum of 5 years.
