Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
M020-00009-EN
Rev. 4
CENTA Antriebe Kirschey GmbH
2 / 52
Contents
1
General remarks ..................................................................................... 6
2
Safety ..................................................................................................... 7
2.1
Safety remarks .................................................................................. 7
2.1.1
Signal words ......................................................................... 7
2.1.2
Pictograms ............................................................................ 8
2.2
Qualification of deployed personnel ...................................................... 8
2.3
Intended application ........................................................................... 8
2.4
Application not in compliance with the intended use ..............................10
3
Delivery, transport, storage and disposal ............................................. 11
3.1
Delivery ...........................................................................................11
3.2
Transport .........................................................................................11
3.3
Storage ...........................................................................................11
3.3.1
Storage location ....................................................................12
3.3.2
Storage of couplings / flexible elements ...................................12
3.4
Disposal...........................................................................................12
4
Technical description ............................................................................ 13
4.1
Characteristics ..................................................................................13
4.2
Specifications ...................................................................................13
5
Alignment of the units being connected ................................................ 14
5.1
Axial alignment .................................................................................15
5.2
Radial alignment ...............................................................................16
5.3
Angular alignment.............................................................................18
6
Mounting .............................................................................................. 20
6.1
General assembly instructions ............................................................20
6.2
Mounting overview ............................................................................22
6.3
Mounting the hub (3; if existing) ........................................................24
6.3.1
Mounting the hub with cylindrical bore and keyway ...................24
6.3.2
Mounting the hub with conical oil interference fit .......................26
6.4
Mounting the adapter (17; if existing) .................................................29
6.5
Aligning the units ..............................................................................29
6.6
Positioning the membrane (1.2.1) .......................................................30
6.7
Positioning the ring (1.4) inside the rubber element (1.1) ......................31
6.8
Mounting the rubber element and the adapter ......................................31
6.9
Mounting the pre-mounted rubber element (F) to the flywheel ...............32
