Page 26
For technical questions, please call 1-888-866-5797.
Item 62120
Custom Data Set - Record Select PIDs
WARNING! DO NOT attempt to operate
the Scan Tool while driving the vehicle.
Have a passenger operate the Scan Tool.
1. Start the vehicle and begin driving.
2. From
Record Data
, have the
passenger select
Custom Data Set,
then press
OK.
………………..
Record Data 2/3
..
Complete Data Set
Custom Data Set
Unit of Measure ?
Figure AS
3.
Custom Data Set
screen shows
which buttons can be used to
select/deselect PIDs. Have the
passenger press any button to
move to the next screen.
……………
Custom Data Set
……… …..
[
] – Select/Deselect
[ ] – Select/Deselect all
[OK] – Confirm
[ESC] – Cancel
Press any key to con.
Figure AT
4. Have the passenger
select/deselect PIDs.
……..
Custom Data Set 4/20
FUELSYS1
FUELSYS2
?
√
LOAD_PCT
#001
ECT
SHRTFT1
LONGFTI
DTC_CNT
Figure AU
5. Have the passenger select
a
Trigger Mode:
•
Manual Trigger -
Recording will begin
after memory location is selected.
•
DTC Trigger -
Recording will
begin when a DTC is detected.
Figure 5.21
…….……
Pick Trigger Mode 1/2
Manual Trigger
DTC Trigger ?
Figure AV
6. From
Select Memory,
have
the passenger select a memory
location, then press
OK.
…………….
Select Memory 1/3
..
Location #1 *
Location #2
Location #3 ?
Figure AW
Note:
An asterisk (*) next to a
location indicates a recording already
exists there. Selecting this location
will overwrite it with new data.
