1.1
Instructions
Important information and instructions in this documentation are designated as follows:
Danger
Draws attention to an exceptionally grave, impending danger to your health or life.
!
Warning
Indicates a hazardous situation that could lead to injuries or component damage.
!
Attention
Draws attention to possible dangers, component damage or loss of quality.
i
Notice
Gives tips to make a working sequence easier or draw attention to important working processes.
Environment!
Gives you tips on protecting the environment.
X
Handling instruction.
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special fittings).
Time
Information in the display.
1.2
Intended use
• The printer is manufactured in accordance with current technological status and recognised safety rules.
However, danger to the health or life of the user or third parties and/or damage to the printer and other tangible
assets can arise during use.
• The printer should only be used for its intended purpose and if it is in perfect working order, and it must be used
with regard to safety and risks as stated in the operating manual.
• The printer is intended exclusively for use with consumable materials that have been approved by the manufac-
turer. Any other use or use going beyond this shall be regarded as improper use. The manufacturer/supplier shall
not be liable for injury or damage resulting from unauthorised use; the user shall bear the risk alone.
• Usage for the intended purpose also includes complying with the operating manual, including the manufacturer‘s
maintenance recommendations and specifications.
i
Notice!
The complete documentation is included in the CD, and can also be found on the Internet: www.cembre.com
1.3
Safety instructions
• The printer is configured for voltages of 100 to 240 V AC. It only has to be plugged into an earthed socket.
• Only connect the printer to other devices which have a protective low voltage.
• Switch off all affected devices (computer, printer, accessories) before connecting or disconnecting.
• The device may only be used in a dry environment, do not expose it to moisture (sprays of water, condensation,
etc.).
• Do not use the printer in an explosive atmosphere.
• Do not use the printer close to high-voltage power lines.
• If the printer is operated with the cover open, ensure that people‘s clothing, hair, jewelry etc. do not come into
contact with the exposed rotating parts.
• The printer or parts of it can become hot during operation. Do not touch, and allow to cool down before changing
consumable material and before disassembly.
1
Introduction
ENGLISH
7.3
Misure per le marcature a riflessione
Etichette con marcature a riflessione
Rotolo in continuo con marcature a riflessione
Figura 21
Misure per le marcature a riflessione
Quota
Definizione
Misure in mm
A
Distanza etichette
> 2
AZ
Distanza area di stampa
> 2
L
Larghezza della marcatura a riflessione
> 5
M
Altezza della marcatura a riflessione
3 - 10
X
Distanza marcatura - centro del percorso carta
-53 - ±0
Z
Distanza inizio virtuale etichetta – inizio effettivo etichetta
Adattare l'impostazione del software
da 0 a A /
consigliato : 0
• Le marcature a riflessione devono trovarsi sul retro del materiale.
• I dati valgono per marcature nere.
• Le marcature colorate non vengono eventualmente rilevate.
X
Eseguire test preliminari.
Tabella 10
Misure per le marcature a riflessione
7
Etichette / rotolo in continuo
ITALIANO
Direzione
del
percorso
Inizio virtuale etichetta
Marcatura a riflessione
3
48
