Installation
29
Brave 30 ES- Brave 60 ES - Brave 90 ES
4.3 Environmental conditions
The machine must be positioned so it is protected from rain and water splashes, and in a location with the
temperature appropriate to its climate class (stated on the EC nameplate); otherwise warranty rights are
forfeited and malfunctions may occur.
The possible climate classes are:
SN - For ambient temperatures from 10°C to 32°C
N - For ambient temperatures from 16°C to 32°C
ST - For ambient temperatures from 18°C to 38°C
T - For ambient temperatures from 18°C to 43°C
CAUTION
LOW TEMPERATURE
If the machine is exposed to temperatures below 0°C, the water inside it may freeze, causing
damage to the machine itself.
4.4 Electrical requisites
Check that all electrical equipment complies with the data provided on the machine nameplate.
DANGER
ELECTRICITY SUPPLY
Always disconnect the machine from the electricity supply before doing any work on it, to prevent
damage and health hazards.
CAUTION
ELECTRICAL REQUISITES
The electrical circuit must be correctly earthed and connected by means of a suitable differential
safety breaker.
CAUTION
PLUG SUPPLIED
Connect the machine to the electricity mains using the plug provided.
If it needs replacing, use an equivalent model homologated in the country of use.
If you need to use extensions, multiple sockets or adapters in general, use only material with
a quality certification mark; their power rating must always be higher than the machine's rated
power absorption.
