Installation
28
Rev. 10/17
Brave 30 ES - Brave 60 ES - Brave 90 ES
4 - Installation
4.1 Checks and Unpacking
Always check that the machine received
corresponds to the model indicated in the accompanying
document.
The machine is shipped in a cardboard box. Once the
packaging has been removed, check the machine has not
been damaged in transit; if damage is found, claim
against the carrier for any problems.
CELLI S.p.A. declines any liability in the event of
damage in transit.
Users are advised to contact CELLI S.p.A. or authorised
dealers for genuine components or spare parts.
The machine's packaging consists of a cardboard box and a suitable amount of padding material. Dispose of
this in accordance with the relevant local legislation.
Do not burn packaging components or dump them in the environment.
4.2 Positioning
The machine must be placed on a surface capable of bearing the weight of the dispenser
complete with water. The chosen position must in any case allow satisfactory ventilation; in
particular, there must be a gap of at least
40cm
(16 in) around the back and top for ventilation.
The appliance must not be placed close to direct or indirect heat sources (ovens, stoves,
radiators, etc.). The electricity and water supply points must be close to the dispenser, and positioned so
that the electric cable and water hose do not create obstacles.
BR0150
40cm
(16 in)
SIDE VIEW
FRONT VIEW
BR0160
40cm
(16 in)
40cm
(16 in)
40cm
(16 in)
40cm
(16 in)
