45
When no entries are present in Denied access or Allowed access fields everyone is
permitted to access the target. Specifying at least one entry in Allowed access field
excludes all the clients that do not match it from accessing the target.
When you specify at least one entry in Denied access field, every CHAP user or
CHAP users from network class address are denied form accessing the target.
When you specify any IP address in Allowed access field, CHAP users form that
address are allowed to access the target even if the same address has been specified
in Denied access field.
If you enter only Allowed access field then Denied access field will be
automatically entered with 0.0.0.0/0 entry.
Please note that already active sessions to the target will persist regardless
of the newly applied settings. You can ensure that the settings are forced
immediately after you apply them by going to “MAINTENANCE”
“shutdown”
”connection reset” and resetting the connections manually. Keep in mind that all
the unsaved client data might be lost.
There is possibility of entering network class address in two ways:
192.168.2.0/255.255.255.0 - normal form,
192.168.2.0/24 - short form.
When you enter network class address in normal form, it will be automatically
converted to short form.
Examples:
Denied access: 0.0.0.0/0
Allowed access: 192.168.2.30/0; 192.168.3.45
These settings deny access from every IP address or network class address, only
addresses in Allowed access field are granted for accessing the target.
Denied access: 192.168.0.0/16
Allowed access: 192.168.2.30; 192.168.10.230; 192.168.30.0/24
These settings deny access to any IP addresses from network 192.168.0.0/16. Grant
access for IP addresses 192.168.2.30, 192.168.10.230, all IP addresses from network
192.168.30.0/24 and all IP addresses that have not been denied in the Denied access
field.
Function: Rename target
Provide a new target name. A target name is considered case-insensitive. Every
character entered will be converted to lower-case.
Function: Remove target
This function removes all volumes from the target.
