21
Function: Bond interface settings
Here you can edit a bonding network interface.
To remove network interface form bonding select it in field remove and click "apply"
button. Bonding can be deactivated by setting of "Active" option. You can change bonding
interface network configuration, you can use static or dynamic (DHCP) network
configuration.
Network interfaces that are part of a bonded interface are described by following
fields:
Primary:
A string (eth0, eth2, etc) specifying which slave is the primary device. The specified
device will always be the active slave while it is available. Only when the primary is off-
line will alternate devices be used. This is useful when one slave is preferred over
another, e.g., when one slave has higher throughput than another. The primary option is
only valid for active-backup mode.
Interface:
Network interface name.
State:
Shows if NIC is connected.
Function: Remove bonding
Here you can remove a bonding interface.
5.1.2 Administrator
Function: Administrator access
