29
When you click on "start" button then the appropriate disk, it will start reading and you
can determine which disk is it by watching "disk-activity LEDs". For proper operation
of this function there should be no other activity on hard drives.
Identification will stop automatically after one minute if you do not stop it
before (by unsetting appropriate checkbox and applying form). Using this function
during normal operation is highly unrecompensed and will cause your server to slow
down.
Function: Manager
In this function you can manage the RAID array.
Available operations:
RAID 0:
Construction of this RAID does not allow to manage it anyway. Every unit must not be
failed. If any would be the whole array would be destroyed.
RAID 1:
To set unit as a Faulty one mark proper checkbox (in the column F) and click on Apply
button. To delete any unit from an array mark proper checkbox (in the column R) and
click on Remove button.
RAID 5:
To set unit as a Faulty one mark proper checkbox (in the column F) and click on Apply
button. To delete any unit from an array mark proper checkbox (in the column R) and
click on Remove button.
