14
In branch: “Discovery” click button “Add”, then enter your Celeros XL Series IP address,
Next click “Advanced…” button, and mark “CHAP logon information”, next give User name
and Target secret and then two times click “O.K.” button,
In the branch “Targets” you will see name of available iSCSI targets e.g.
“iqn.2006.10:iscsi.target0”,
Click “Log On” button, and if you entered password, you have to do the same as in point “e”,
then press “O.K.” button, then the chosen target status will change for “Connected”
Next choose settings
control panel
administrative tools
computer management
disk
management,
Now all available iSCSI TARGET drives will be displayed. In order to use them you have to
format them and mount to the system as a next disk letter.
Microsoft iSCSI Initiator ver. 2.02 does not support dynamic disk. Target password
must consist of minimum 12 and maximum 16 alphanumeric characters. Please read Manual
and Release Notes of Microsoft iSCSI Initiator for more details, which you can also find on
Microsoft website.
Please do not ignore time settings on iSCSI target and client station. Those settings
must be the same. Time can be synchronized in the menu Web Interface “Setup”
“hardware”
in Function “Set time”
