DTV-UDWG100F User Manual
Guilin CEKE Communication Equipment Co., Ltd.
Add: D-08, Information Industrial Park, Chao Yang Rd, High-tech District, Guilin, Guangxi, 541004, P.R.China.
Tel: +86 773 2120 156 Fax: +86 773 2120 299 Email
：
[email protected] Web: www.glsq.com
7
can use them directly. The installation of the external accessory modules can be
completed in the project construction progress. The following table shows the modules
configuration of all types of repeaters:
Module Name
10mW
～
200 mW
1W
～
200W
GPRS monitoring module
Built-in
Built-in
Optical Receiver Module
External
Built-in / External
Input Filter
External
Built-in / External
Output Filter
Built-in
Built-in / External
MMDS Receiver Down-conversion Module
External
Built-in / External
Input RF Delay Module
External
Built-in / External
4-5
．
Cleaning and Maintenance
Before cleaning, please cut off power supply of the machine. If you use a damp cloth to
clean the surface gently, make sure there is no liquid spilled inside the equipment
during the cleaning, users can also use a hair dryer or vacuum cleaner to remove the
dust inside the machine.
4-6
．
Notes
(1) Please pay attention to equipment security and personal safety, cable must be
correctly connected before switching on the machine.
(2)There is AC220V voltage power inside the cabinet.
(3) If the repeater is switched on without antenna being connected, internal components
are likely to be damaged due to the RF reflection caused by open circuit.
(4)Non-professionals can not arbitrarily move the cable, open the case, and move the
accessories inside cabinet, improper operation may damage the device because of
strong electromagnetic field inside the equipment,
(5) The module shield block can be opened only when power supply is cut off,
otherwise it will damage the components inside
.
(6)The maintenance must be implemented by skilled technical personnel. The genuine
parts must be used to replace damaged parts.
(7) Wear anti-static wrist strap to prevent components damage caused by static
