DTV-UDWG100F User Manual
Guilin CEKE Communication Equipment Co., Ltd.
Add: D-08, Information Industrial Park, Chao Yang Rd, High-tech District, Guilin, Guangxi, 541004, P.R.China.
Tel: +86 773 2120 156 Fax: +86 773 2120 299 Email
：
[email protected] Web: www.glsq.com
20
value. For example, the reflection rate of 50W machine is at 5W, the protection point
will be set at 20W.This value could be increased if there is strong reflection after
checking the antenna or feeder work properly.
3-7.MAX DC POWER Power supply voltage upper protection point. If power supply
display value surpasses the voltage upper protection point, it will come into protection.
The general setting is display value increase by 4V. If it shows 39V, the protection point
setting is 43V.
3-8.MIN DC POWER Power supply voltage lower protection point. If the power
supply voltage display value shown in 1-5 is lower than power supply lower limit
protection point, it will come into protection; Generally the display value decreased by
7V. If it shows 39V, the protection value setting is 32V.
3-9.PASSWORD SET Password setting This is the entry password for item 3
SETUP. The default password is 0000. Arrow keys for resetting the password and
ENTER for confirmation.
4
、
SYSTEM SET GPRS GPRS setting
If the repeater is equipped with GPRS module and corresponding antenna, then he can
use the mobile phone SMS function to have remote monitoring of DTV-UDWG series
repeater. The usage is as follows: For example, using our own cell phone to edit X300X
with our own phone number, then sending this message to repeater cell phone number.
Means using 137XXXX3786 cell phone to send a message ‘X300X137XXXX3786’ to
mobile phone number 139XXXX2007 of the repeater SIM card, and we will receive a
message of repeater status. The repeater will enable the 4:.SYSTEN SET –12.GPRS
ENBBLE
（
GPRS switch
）
,no more settings are needed, Message will be received as
