6.1.3 - SWITCH LABELS
The switch labels may become stained and/or form holes with wear and
tear. Call the “Assistance Centre” for their replacement..
6.1.4 - ELECTRICAL LEAD
Periodically check the wear and tear on the electrical lead and call the
“Assistance Centre” should replacement be necessary.
6.1.5 - DISCS
The cutting edge of the blade may deteriorate with use.
For the DTV, DT 2, 3, 4, 7, 9 and PS 6, 8, 10, 20; discs, new ones will
have to be acquired.
For the DF 1, 2, 3, 4, 5, 8, 10, 14 e DQ 4, 6, 8, 10 discs, the blades may
be replaced. In such case, call the “Assistance Centre” specifying the
exact code of the disc.
6.2 - WHAT TO DO IF...
6.2.1 - The disc break is defective:
Check that the discs and disc holding pivot have been properly cleaned.
6.2.2 - The lid does not clamp shut:
Check that the lid has been correctly positioned and properly cleaned.
6.2.3 - The product is not properly cutted:
Check the wear and tear of the knives.
6.2.4 - The product is expelled with difficulty or badly cutted:
Check that the expulsion palette is assembled with the DT (all the ranges);
DF 1,2,3,4 and DQ 4 discs, that the tray is not full and that the opening is
not obstructed.
6.2.5 - The machine jams:
Ensure that the product to be processed is not frozen or too hard and that
the electrical current supplied is the same as that indicated by the
technical-registration plate
(Fig. n°19)
.
6.2.6 - The microswitch on the press lever and lid do not function:
Check that they are not blocked by dirt or other particles.
22
4.3
- ELECTRICAL DRAWING OF THE VEGETABLE CUTTER
4.4
- CHECKING THE FUNCTIONING ORDER
CHAP.5 - USE OF THE MACHINE
pag. 19
5.1
- DISC ASSEMBLY
5.2
- PRODUCT LOADING AND CUTTING
CHAP.6 - MAINTENANCE AND PRACTICAL ADVICE
pag. 21
6.1
- GENERAL REMARKS
6.1.1 - Belt
6.1.2 - Feet
6.1.3 - Switch labels
6.1.4 - Electrical lead
6.1.5 - Disc
6.2
- WHAT TO DO IF….
6.2.1 - The disc break is defective
6.2.2 - The lid does not clamp shut
6.2.3 - The product is not properly cutted
6.2.4 - The product is expelled with difficulty or badly cutted
6.2.5 - The machine jams
6.2.6 - The microswitch on the press lever and cover do not function
6.2.7 - The machine does not switch on
CHAP.7 - CLEANING THE MACHINE
pag. 23
7.1 -
GENERAL
REMARKS
7.2
- PRODUCTS TO BE USED
7.3
- PROCEEDURES TO BE FOLLOWED
CHAP.8 - DISMANTLING
pag. 24
8.1
- PUTTING THE MACHINE OUT OF ORDER
8.2
- DISPOSAL
3
