Cecilware Radiance 10 Technical & Service Manual Download Page 1

Radiance

Cappuccino Dispenser

Technical Service Manual

Multiple national
and international
patents pending

Grindmaster-Cecilware

4003 Collins Lane, Louisville, KY 40245 USA 
Phone: 502.425.4776 Toll Free: 800.695.4500
Fax: 502.425.4664
Web: gmcw.com  Email: [email protected]

Safety Information ..............................................2
Specifications .......................................................4
Installation ...........................................................5
Installation Process for Advanced Features .....10
Wi-Fi Password...................................................11
Grindmaster Connect™ Setup ..........................12
Video Merchandiser Setup................................13

Adjustments.......................................................22
Maintenance......................................................28
Troubleshooting Guide .....................................30
Parts Diagram and List ......................................33
Wiring Diagrams................................................42
Decals .................................................................56

Thank you for purchasing this quality beverage dispenser. For your safety and the safety of others, read all
warnings and the operator manual before installing or using the product. Properly instruct all operators. Keep
training records. For future reference, record serial number here:

Table of Contents

Model: Radiance 5A pictured

©2016 Grindmaster-Cecilware

Printed in USA

0816 Form # CW-330-01

Part # 390-00076

Grindmaster-Cecilware provides the
industry’s BEST warranty. Visit gmcw.com
for warranty terms and conditions.

Radiance 5

Radiance 10

Summary of Contents for Radiance 10





























































Reviews: