Biotrituratore
Ceccato Olindo
Pag. 36
Aprile 2013
5.4.2 I
gnition engine model Tri-GX200 and GX390
To start the petrol engine, set the knob (1) to the ON position and then proceed by pulling
sharply the starter chord (2) placed on the engine adjusting the choke lever (3) When you
turn the engine on, you can adjust the throttle accordingly(4) (fig.) For more information,
please refer to the attached documentation on combustion engines.
5.4.3
Cardano TRI-CAR model application
The TRI-CAR bio-shredder needs to be inserted into the tractor’s battery plug, in order to
work, paying attention to the following:
1.
Hook up the appliance, as prescribed, on a tractor with suitable power, to the
appropriate device (flap), as per guidelines.
2.
The machine and all its accessories must carry – for transport – signalling and
adequate protection.
3.
Before inserting the plug, ensure that the number of established turns are made.
4.
Before leaving the tractor, lower the hooked appliance from the lifting pulley, stop
the engine, apply the handbrake and take out the keys from the ignition board.
5.
Never place yourself between the tractor and the equipment with the engine on and
the pulley lever.
6.
Never stand between the tractor and the equipment when either are moving and the
handbrake released.
7.
Always disengage the clinking plug when the lifting cam is at a very wide angle.
(See image 10)
2
STARTER CHORD
4
THROTTLE
3
CHOKE
1
ON/OFF SWITCH
