Biotrituratore
Ceccato Olindo
Aprile 2013
Pag. 31
It's important to remember that a cautious operator who is in good physical and
mental condition may be the best insurance against any injury.
3.1.
Stickers on the machine
On the machine, there are stickers and pictograms for the purpose of advising the
operator to pay particular attention to that given situation.
Ensure the good condition of the safety labels and learn their meaning: these are
necessary to prevent accidents; so, if they are damaged, discoloured or belong to other
replaced parts, they must be replaced with the original ones by request to the
Manufacturer, then, place them in the position as described in this booklet .
The danger and warning symbols (see Fig. 7 - 8 - 9) specified below are located on the
machine (see fig. 10)
.
1
2
3
fig. 7
1 Power supply shock hazard: (equipment under 230 volt single phase).
2 Lifting point.
3 Direction of motor rotation.
4
5
6
fig. 8
1 Turn off the power and read the manual before carrying out maintenance.
2 Do not put your hands - danger of cutting
3 Danger of hands getting stuck and severed.
