Ceccato Olindo
Biotrituratore
Pag 40
Aprile 2013
The response times listed below are related to normal conditions of use, so if the machine
is under heavy load of work, these times should be appropriately reduced.
Clean the panels of the machine, panel and controls with soft rags and dry or slightly
soaked in mild detergent solution, do not use any type of solvents such as alcohol or
benzine, as these may damage the surface.
Keep oils and greases out of the reach of unauthorized personnel, read carefully the
instructions set on the containers and adhere scrupulously, avoid direct contact with skin,
wash thoroughly after use.
At the end of the maintenance, ensure that all safety devices are back into pristine
conditions, thus becoming fully functional in all its integrity.
In the event of damage to the engine, before taking it to a service center HONDA
(never by an authorized HONDA), you must call the company "Ceccato Olindo
Snc" machine manufacturer (tel: +390495742051). You can also call the company
"Demal Snc" (tel: +390423491670), a supplier of engine and Help Center HONDA,
for further advice, to resolve any problem.
WARNING
Maintenance of the grinding mass.
The new machine has a great suction and a good grinding due to
tempering and grinding of the blades.
If the suction begins to decrease is the first sign that the 2 frontal blades of
the mass with URGENCY require the renewal of sharpening as they may be
the cause of a possible rupture of the mass itself.
To be able to sharpen the blades, our company recommends that you
contact your dealer.
NB: you can not calculate the time duration of sharpening because it
depends on: the type of wood (dry or green); diameter of the wood smaller
or larger; from any damages caused by unsuitable materials (earth, stones
or ironware).