Biotrituratore
Ceccato Olindo
Aprile 2013
Pag. 43
8.2
Moving the machine
To move the shredder, grab the handle, as indicated, place one foot on the wheel axle, tilt
the machine towards you. At this point it’s possible to move the equipment. (See
Figure13)
fig. 15
8.3
Working Environments
It is recommended that the machine operates with the environmental conditions
indicated below:
min
max
recommended
temperature
5 C°
40 C°
16 C°
humidity
95 %
70 %
8.4
Connecting to power sources
8.4.1
Electrical connection
The machinery must be connected according to the model to 220 Volt 50 Hz 1 ph +
ground, plug in, beforehand, a circuit breaker.
Check that the equipment’s voltage and frequency values (see id tag) correspond to those
of the power supply.
Connecting to the electricity power requires a qualified electrician in accordance with the
provisions of the legislation of the country of the user.
handle
wheel
axle
inclination